Optical receiver feature:
High responsible, with PIN photoelectric converter.
High precision, with 10 cascade LED display the optical power.
Optimization and typical circuit design, the pre adopts SMT process and the post adopts module amplify that made the photoelectric signal transmission fluency.
Power double output, high gain and low distortion.
With optical AGC, when the input optical power range is -7~+2dBm, the output lever, CTB and CSO are keep constantly.
High responsible, with PIN photoelectric converter.
High precision, with 10 cascade LED display the optical power.
Optimization and typical circuit design, the pre adopts SMT process and the post adopts module amplify that made the photoelectric signal transmission fluency.
Power double output, high gain and low distortion.
With optical AGC, when the input optical power range is -7~+2dBm, the output lever, CTB and CSO are keep constantly.
| Item | Unit | Technique Parameters | |
| Optical Parameters | |||
| Receiving Optical Power | dBm | -7 ~ +2 | |
| Optical AGC Control Range | dBm | +2 ~ -7 | |
| Optical Return Loss | dB | >45 | |
| Optical Receiving Wavelength | nm | 1100 ~ 1600 | |
| Optical Connector Type | SC/APC or specified by the user | ||
| Fiber Type | Single Mode | ||
| Link Performance | |||
| C/N | dB | ≥ 51 | EQ 8dB, output level 108dBμV (FZ110) |
| C/CTB | dB | ≥ 67 | |
| C/CSO | dB | ≥ 62 | |
| RF Parameters | |||
| Frequency Range | MHz | 45 ~862/1003 | |
| Flatness in Band | dB | ±0.75 | |
| Rated Output Level | dBμV | ≥ 108 | |
| Max Output Level | dBμV | ≥ 116 (-7 ~ +2dBm optical power received) | |
| Output Return Loss | dB | ≥16 | |
| Output Impedance | Ω | 75 | |
| EQ Range | dB | 0~15 | |
| ATT Range | dB | 0~15 | |
| Generic Characteristic | |||
| Power Voltage | V | A: AC (150~265)V B: AC (35~90)V | |
| Operating Temperature | °C | -40~60 | |
| Consumption | VA | ≤14 | |
| Dimension | mm | 220 (L)* 205 (W)* 65 (H) | |